| NX
Audio line array is intended for medium to small venues and use
concert proven drivers. The V-12 & VX-18 drivers delivers extraordinary
power handling, clarity, flexibility and clean sound in an affordable
package. |
V-12
Technical Specification:
- Constant
Curvature Array - The waveguide mounts three compression drivers
on a continuous arc enabling them to work together acoustically
as if they were a single driver.
- Amplitude
Shading- Convenient series of switches on each enclosures that
controls the output of each high frequency section in the array.
- Suspension
and Rigging.
- Dual
Angle Pole Socket - dual angle pole sockets allow great flexibility
in aiming the enclosure to the desired point.
- 12"
two-way, line array loudspeaker system
- Freq
Resp: 80 Hz - 20 kHz
- Coverage:
100ºx15º nominal
- Crossover
Modes: Bi-amp/passive, externally switchable
- Crossover
Freq: 1.2 kHz
- Power
(RMS/Program):
- Passive:
500 W / 1000 W
- Bi-amp
LF: 500 W / 1000 W
- Bi-amp
HF: 75 W / 150 W
- Max
SPL: Passive: 126 dB SPL, Bi-amp LF: 126 dB SPL,
- Bi-amp
HF: 133 dB SPL
- System
Sensitivity (1w @ 1m): Passive: 98 dB SPL,
- Bi-Amp
LF: 98 dB SPL, Bi-Amp HF 109 dB SPL
- LF
Driver 1 x 12in neodymium magnet
- HF
Driver 3 x 25.4 mm (1.0 in) voice-coil, neodymium magnet compression
driver
- Nominal
Impedance: Passive: 12 ohm,
- Bi-amp
LF 12 ohms, Bi-amp HF: 12 ohms
- Weight:
27 kgs
|
V-12 |
V-12
REAR |
| ... CLICK ON THE IMAGE FOR ENLARGE THE PICTURE ... |
|
